BMW Standard Tools is the software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.
Hardware:
A PC (Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)
An INPA/EDIABAS K+DCAN USB Diagnostic cable (cheap €19 in eobdtool.co.uk)
How to set up BMW Standard Tools 2.12?
Bmw Dme Software Update
Open WinKFP, then choose “Import/Export” in the main menu, and pick “Import” then “PABD” Browse to your unpacked daten folder and drill down to “sgdat”. base SP-daten-E60 sgdat. Hit CTRL-A to select all files, then click “Import”. Tried WinKFP 5.1.0 in XP Mode to no avail. Tried installing WinKFP 5.3.1 (bundled with BMW Standard Tools 2.12), program wouldn't start. Finally took the risk to install WinKFP 5.3.1 in native Windows 7 64-bit, everything worked out just fine. I wouldn't recommend doing it in a 64-bit OS because on the WinKFP window it clearly says '32-bit.
Step 1: Download BMW Standard Tools 2.12
Download here and install follow system prompts:
Step 2: Download and install INPA
http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b
Step 3: Download and install NCS Expert ENG
Make sure your EDIABAS should already be configured to STD:OBD for use with INPA
cable. Download EDIABAS configurator here:
This tool (in C:EDIABASEdiabas-Konfiguratorfolder) allows
you to easily change the ediabas.ini to your desired interface. So if you are
switching from INPA to E-Sys you could use this to switch from STD: OBD to ENET.
Set COM port for INPA cable
Connect the INPA DCAN cable with PC Install device deriver Come to My Computer>>Device Manager>>Ports (COM&LPT)
In this case it’s COM5. We need to change this in the obd.ini file located
in the c:ediabasbin folder.
Right click on your INPA cable driver for example mine is labeled “USB Serial Port” and click on properties. Now in the property window click on the advanced tab.
Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic below for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5. Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.
Browse to C:EDIABASBIN and find file obd.ini and
open it with an editor (e.g Notepad)
The First 3 lines will look like this…
[OBD]
Port=Com1
Hardware=USB
Need to change the Port to reflect our INPA cable which in our case
is COM port 5. So change it to look like this…
[OBD]
Port=Com5
Hardware=USB
NOTE: Remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above. Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and open
INPA.
Step 6: SPDATEN Files
Download and install SPDaten files (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share. (Follow the instructions provided at the end of the blog labeled “How to start WinKFP” which will explain how to import the SPDaten files to WinKFP)
Once downloaded you can now
**EDITED 10-12-2013**
For NCSExpert to install or update the data files, copy the files from SP-daten-E##daten to
the C:NCSEXPERDATENE## (where E## is whatever chassis you’re
updating). You will also want to copy the files from SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU to C:EDIABASECU
After copying the data files to
c:NCSEXPERDATENE## copy the following files to the following locations:
copy C:NCSEXPERDATENE##*.000
C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN
2. After installation, the directory (Drive letter):EC-APPSNFSSGDAT contains file CABI.h only and doesn’t contain files, required for working.
3. Mount the Progman disk in virtual drive (or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from directory (Drive letter):CIP-Installerbin, each one in its own directory.
(You must get directories like SP-daten-Exx)
4. Now copy all *.IPO files from every directory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT.
For this purpose better use Total Commander, it allows overwriting elder files
with newest. This directory now looks like this:
5. In the same way refresh directory (Drive letter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6.
Run WinKFP
7. Choose “Import/Export – Import – Assemly line data” and import all data needed from directories (Drive letter):SD-daten-ExxDATA Details how to import assembly line data are given
in official manual for WinKFP
8. After importing the data, copy all files from directory (Drive letter):SD datenE70DATAgdaten to directory (Drive letter):EC-APPSNFSDATAGDATEN, overwriting all existing files.
Note: If you use Progman v.30 for updating WinKFP, it has error in file GDATENSgidc.as2. Simply open this file with Notepad and delete line 165.
WinKFP is ready for programming
ICOM for BMW ISIS ISID A+B+CPlus V2014.06 External HDD Support Multi-language
2.
3.
BMW INPA K+CAN USB Interface PC Based BMW Diagnostic Tool
Related Post:
This post show how to configure WIN KFP Expert mode programming.
BMW Standard Tools 2.12 Free download (include WinKFP)
WinKFP Expert Mode Programming Configuration:
Delete all files in the Develop folder.
Select the program data folder in this case MV1746.
Select the MV1746.DAT file open with Notepad
Press Ctrl + H and search the program number. The program number here is 7592774.
You will then find a line of numbers.
1st Program Number
2nd Hardware Number
3rd 0pa Number
4th 0da Number
Copy the 2 files over to Develop folder. *.0pa and *.0da file
Copy the 2 files over to Develop folder. *.0pa and *.0da file
Select the Coapi.ini file
Bmw Winkfp Download
The ZBNUMBER and SWNUMBER must be changed to the program number.
The ZBNUMBER and SWNUMBER must be changed to the program number the save the file.
Select WinKfp and check the configuration.
Change configuration to be exactly the same as the example. Select OK when completed
Select Comfort Mode
How To Use Winkfp
Select Enter ZUSB
Select OK after entering program number.
Select OK
Select Enter Vin
Select OK after entering the VIN.
Select Done
The ECU address, PABD and P-SGBD will appear. Exit program and restart program.
Select Comfort Mode
Select Enter ZUSB
Winkfp Error 209
Select OK after entering program number.
Select OK
Select Done
Select Cancel. Do not enter a VIN number.
Select Expert Mode
Select PABD
Select number as found before.
Select P-SGBD
Select number as found before.
Select ECU Address
Select number as found before.
Select Program file
Select OK
You will see the program file number. Select Data file.
Select OK
Select OK this error can be ignored as you are in Expert Mode.
You will see the data file number. Select Done.
Select Prog Program
Now enter the VIN and press OK. Programming will start.
Now select Prog Data and programming will start.
After programming you can exit the program.
(Visited 296 times, 1 visits today)